尺寸指南 SIZE GUIDE

戒指 RING
Kaomin Studio 使用的是「美國圍」尺寸,戒圍測量時請務必達到精準之目的,請在室溫下進行測量,過熱或過冷皆會影響精準度,以下將為您介紹較為精準的測量方式,為了避免尺寸測量誤差,請務必詳細閱讀以下內容若有疑問歡迎與我們聯繫討論,感謝您。

The dimension of the “American parameter” is applied by KAOMIN.  In order to reach the highest accuracy when measuring, try to be away from any of deviation, and to gain the optimal way of measuring under the in-house temperature, the best measuring result will be achieved in the evening; The accuracy will be  influenced when the temperature is an excessively hot or cold condition, the recommendation and the introduction to the way of measuring we proposed in illustrated below:


尺寸指南-06.jpg
內徑測量 Inner diameter  
此方法需要有戒指,若沒有請參閱方法二 )

  1. 使用您現有的戒指 (戒指需要正圓),並合適您的手指,可以測量戒指的內圓來確定尺寸。

  2. 測量戒指「內圓直徑」請精準的對照尺寸大小 (請參考以下示意圖)
  3. 測量完成後,請參考以下的「內徑尺寸表」即可得出您的「美國圍」尺寸。
  4. 尺寸為中間數值時,請挑選比較接近或小的尺寸,若有疑問歡迎與我們聯繫討論,感謝您。

    If you have ever worn the ring  (the ring must be the perfect circle.), please put down the ruler on a plat level and to measure the inner parameter of diameter, and refer to “inner parameter of the diameter chart” and you will gain the size based on the “American parameter”. The larger size needs to be chosen  when the middle value is measured and see below  instance:

尺寸指南-05.jpg

尺寸指南-10.jpg

尺寸指南-09.jpg
膠帶測量 Tape  (紙膠帶 or 透明膠帶)
此測量方式誤差值較大,請使用紙膠帶為佳,並務必詳細閱讀以下內容,如果後續收到商品戒指有誤差可能會酌收更改費用,感謝您。

  1. 請使用美工刀先割出您選購的「戒指寬度」之膠帶。(可以先黏在桌上比較好割出寬度)
    尺寸指南-04.jpg
  2. 測量位置於手指內,膠帶反黏,必須拉緊黏合,記得微緊一些不能過鬆,並使用小剪刀小心剪平。
    尺寸指南9-09.jpg

  3. 拿出尺測量膠帶總長度 (mm) ,務必精準的對照,再參考以下「B內圍」並對照「美國圍US」尺寸即可, 若有疑問歡迎與我們聯繫討論,感謝您。

尺寸指南-01.jpg


尺寸指南-10.jpg
銀樓測量&國際圍:
請到附近的銀樓進行測量,銀樓通常使用「國際圍」請記住您的國際圍號數,參考「各國戒圍尺寸表」並對照「美國圍」尺寸。

Please go to the nearby jewelry store to get the measuring, please remember your size under the standard of international measuring if the nearby jewelry store can provide the standard of international measuring only.  And to refer to the below the“ring parameter chart” to obtain your American size, Please contact us for the special customized size.


手環 Bracelet

 線&紙條測量: 

線&紙測量:請拿一條線圍繞手環配戴部位,再對照平尺(cm)量出精準長度,即可得出您的尺寸。

Please measure the total length of the wearing position of the bracelet(cm)